CONTACT : 88820 99811 || info@shapetool3d.in
₹1,800.00
SUNLU Standard Resin cures rapidly upon exposure to 395-405nm UV light emitted by a resin printer(or resin curing machine). It is suitable for use with most 2K/4K/6K/8K resin 3D printers (LCD/DLP/SLA), delivering efficient and reliable results.
Before Use
1. Shake Gently and Fill Appropriately: Shake the resin gently before use.
2. Test Printing: Different resins have varying curing parameters. For the initial print, choose a smaller model to test and avoid wasting resin due to incorrect settings.
3. Adjust for Conditions: Curing speed depends on indoor temperature, layer thickness, and color. Make necessary adjustments for optimal results.
4. Cleaning Resin: Use SUNLU Resin Detergent or alcohol for cleaning. Remove residual resin using an ultrasonic cleaner to preserve print details. Dry completely with a blow dryer.
While Using
1. Temperature Range: Optimal printing temperature is between 18-35℃. If it’s too cold, preheat the resin (do not exceed 60℃).
2. Light Intensity and Duration: Use a mercury lamp or LED light source with an intensity of 5-10mW/㎡. Limit exposure to 1 hour and adjust if needed.
3. Avoid Strong Light: Keep away from high-power, high-voltage mercury lamps or other strong light sources to prevent adverse effects.
4. Light Sensitivity: Print in a darkroom or cover the printer, as the resin is sensitive to light.
5. Safety Precautions: Keep away from children and wear rubber gloves to avoid direct contact with skin, eyes, and mouth. In case of exposure, rinse with plenty of water and seek medical attention if discomfort occurs.
After Use
1. Resin Storage: Do not return unused resin to the container. Do not leave resin in the tank for extended periods. Store used resin in a black plastic container, sealed and away from light.
2. Disposal: Dispose of contaminated or expired resin according to national regulations.
Proper Storage
1. Keep Out of Reach of Children: Ensure resin is stored in a location inaccessible to children.
2. Avoid Sunlight and Heat: Do not store resin in areas exposed to direct sunlight, high temperatures, or humidity.
3. Sealed Storage: Store resin in a sealed container to prevent dust or moisture from affecting print quality.
Reviews
There are no reviews yet.